Jabra Elite 75t User Manual

This Jabra Elite 75t User Manual helps you to understand the settings of the Jabra Elite 75t and also assists in resolving issues with the earbuds. Whenever you face difficulties while operating this earbud, I always recommend referring to this User Manual.

Jabra Elite 75t User Manual

Jabra Elite 75t Features

Active Noise Cancellation
Compact comfort.
Great calls, anywhere.
More power, more freedom.
Your music your way
Proven connectivity.
Durability, guaranteed
Easy access to your voice assistant

Overview

Included accessories

Jabra elite 75t accessories — Jabra Elite 75t accessories

How to wear

Insert the earbud into your ear and rotate it to fit comfortably. Ensure the microphones are pointed toward your mouth

Changing EarGels

For the optimal audio and ANC experience, it is recommended to try each of the different EarGel sizes. The fit should feel tight and secure in your ear. The medium EarGel is pre-mounted on the earbuds. Ensure the EarGel is firmly attached

How to charge

Get up to 5.5 hours on a single charge with ANC on, with a total charge of up to 24 hours with the charging case. If you use the earbuds without ANC and HearThrough, you’ll get even more battery, with up to 7.5 hours in the earbuds and a total of 28 hours with the charging case.

Charging the earbuds

Place the earbuds in the charging case and close the lid. It takes approx. 2 hours to fully recharge the earbuds. When the charging case is opened, the LEDs on the earbuds will flash red, yellow or green to indicate the battery status of the earbuds. The LED on the back of the charging case indicates the battery status of the charging case

Charging the Jabra elite 75t — Charging the Jabra Elite 75t

Fast Charge the Earbuds

When the earbuds are at low battery, placing them in the charging case for 15 minutes will fast charge the earbuds and give up to 60 minutes of battery. Fast charging the earbuds requires that the charging case is fully charged. You can see the current battery status of the earbuds and charging case using the Jabra Sound+ app.

Charging the charging case using USB

Plug the supplied USB-A to USB-C charging cable into the charging case and a USB-A power supply or certified wall charger. It takes approx. 2 hours and 20 minutes to fully charge the earbuds and the charging case. The charging case uses the standard USB voltage of 5v +- 0.25v. It is not recommended to
charge the earbuds using a power supply with a higher voltage.

Note:-Third-party chargers may take longer to charge the charging case.

USB Using in Jabra elite 75t — USB Using in Jabra Elite 75t

Charging the charging case using a wireless charging pad

If you own the wireless charging variant of the Jabra Elite 75t, a wireless charging pad* can be used to charge the charging case.

Place the charging case on a wireless charging pad. The LED on the charging case will flash to indicate the charging case is placed correctly. It takes up to 6 hours to fully charge the earbuds and the charging case.

Because wireless charging pads take longer to fully charge a device, this may result in the device becoming warm. The elevated temperature is within safe operating requirements and has no bearing on the lifespan or performance of the device.

What the LEDs mean

How to pair

Pairing with a mobile device.

Remove the earbuds from the charging case to power them on. Alternatively, press and hold the Left and Right buttons (1 sec)simultaneously to power them on.
Press and hold (3 sec) the Left and Right buttons on the earbuds simultaneously until the right earbud LED flashes blue. The earbuds are now ready to pair to your phone.
Wear the earbuds and follow the voice-guided pairing instructions to pair to your mobile device

How to Use

Power the earbuds off/on

Place the earbuds in the charging case to power them off, or remove them from the charging case to power them on. Alternatively, the earbuds can be manually powered off by pressing the Left and Right buttons on the earbuds simultaneously. To power on, press and hold (1 sec) the Left and Right buttons simultaneously.

Music Controls

Left Earbud	Function	Right Earbud
	Play/pause music	Press the Right button when no ton a call
Press and hold the Left button	Volume Down
Double-Press the Left button When listening to Music	Next Track
Triple-press the Left button when listening to music Repeat to skip to the previous track	Restart track or the previous track

All button functions can be reassigned using My Controls in the Jabra Sound+ app.

Call Controls

Left Earbud	Function	Right Earbud
	Answer/End Call	Press the Right button
	Reject Call	Double-Press the Right button
	Hold/Resume Call	Double-Press the Right Button
Press the Left Button when on a Call	Mute/ Unmute microphone
Double-Press the Left button when On a Call	Sidetone On/Off
	Volume Up	Press and hold the Right Button
Press and hold the Left button	Volume Down

All button functions can be reassigned using My Controls in the Jabra Sound+ app.

ANC, HearThrough and Voice assistant controls

Left Earbud	Function	Right Earbud
Press the Left button when not on a call	Cycle between HearThrough, ANC*, Of
	Activate Voice assistant (Siri, Google Assistant)	Double-press the Right button when not on a call

All button functions can be reassigned using MyControls in the Jabra Sound+ app

HearThrough

HearThrough lets you pay attention to your surroundings and engage in conversation, when not on a call, without needing to remove the earbuds. The microphones pick up surrounding sounds and transmit them to the speakers.

HearThrough levels can be adjusted using the Jabra Sound+ app

Hearthrough levels in Jabra elite 75t — Hearthrough levels in Jabra Elite 75t

Sidetone

Sidetone enables you to hear your own voice when you are on a call. The benefit of Sidetone is that it enables you to determine how loud you are speaking.

Sidetone is on by default during calls and can be turned on/off using the Jabra Sound+ app.

Mono Earbud Use

The right earbud can be used individually for mono music playback or for calls. When used as a mono earbud, the right earbud retains its current button functionality.

To use the right earbud as a mono earbud, place it in your ear and place the left earbud in the charging case. You may need to tap the button on the right earbud to activate mono earbud use.

Auto-pause music

When an earbud is removed from your ear while listening to music, the music will automatically pause.

To unpause the music, return the earbud to your ear within 60 seconds. After 60 seconds, the music can be unpaused by pressing the Right button. Auto-pause music settings can be disabled or configured using the Jabra Sound+ app.

Sleep Mode

To conserve battery, the earbuds will automatically power off when they are out of range of your mobile device for 15 minutes and are not in the charging case, or when they have been inactive for 30 minutes.

To power the earbuds on, press and hold (1 sec) the Left and Right buttons simultaneously. Alternatively, place them in the charging case and then take them back out.

Sleep mode can be configured in the Jabra Sound+ app

MyControls

MyControls is a feature in the Jabra Sound+ app that enables you to reassign any function to each of the earbud buttons, offering you the flexibility to configure the earbuds precisely to your personal preference.

Multiple call handling:- The earbuds can accept and handle multiple calls at the same time.

Multi-Connect

The earbuds can be paired to two mobile devices at once and can accept incoming calls from either mobile device.

To pair to two mobile devices, use the normal pairing process separately for each mobile device (refer to section 5). After pairing to both mobile devices, you will need to select the Jabra Elite 75t again on the first mobile device in the Bluetooth settings to complete the pairing to both mobile devices.

Note:-Only one of the mobile devices will have an active audio channel, and voice assistant will be activated on the last paired mobile device.

Voice guidance and languages

Voice guidance can be turned on/off and the language can be changed using the Jabra Sound+ app.
The following languages are available: English, French, German, Japanese, Mandarin Chinese, Korean.

Voice assistant

Voice assistant settings can be configured using the Jabra Sound+ app.

Update firmware

The Jabra Elite 75t can be updated to the latest firmware version using the latest version of the Jabra Sound+ app.

If notifications are enabled in the Jabra Sound+app, you will receive an automatic notification when a firmware update is available.

After a firmware update, if the LED on the charging case flashes red, this indicates that the charging case was not updated correctly. To complete the firmware update correctly, connect the charging case to a power supply, remove the earbuds from the charging case,
place the earbuds back in the charging case, and then close the lid for 5 seconds. This will complete the firmware update.

How to Reset Jabra Elite 75t

Resetting the earbuds clears the list of paired devices and resets all settings, except for ANC personalization settings.
Step 1:-Place both earbuds in the charging case.
Step 2:-Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LEDs on the earbuds flash purple.
Step 3:-Close the lid of the charging case for 5 seconds to complete the reset.

The earbuds will need to be repaired to your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.

Conclusion

We hope this Jabra Elite 75t Manual helps you Regarding your issues related to this Jabra Elite 75t, If your Issues are not Resolved By this Jabra Elite 75t User Guide, So You have to Visit Jabra Service Center

Thank You! | Team TWSOne

Read Also:-